全部免费播放在线毛片,国产91精品对白露脸全集观看,国产精品碰碰现在自在拍,18禁黄网站禁片免费观看国产,亚洲中文字幕无码爆乳APP,亚洲成AV人在线观看网站,日韩亚洲欧美理论片,永久免费AV无码网站04

          Service hotline:18366197667

          SPC triangle belt

          Rubber products > Triangle belt > SPC triangle belt

          SPC triangle belt

          V-belt is composed of wrapping cloth, top cloth, top rubber, buffer rubber, tensile body, bottom rubber, bottom rubber clip cloth, bottom cloth, etc

          A1550Naming of V-belt: take a1550 as an example, a as model, reference length 1550mm, and its name is a1550

          A - model a

          1550 - with reference length of 1550mm

          Length can be negotiated by both parties


          Belt type

          Upper width

          height

          angle

          marking length

          Common triangle

          Z

          10

          6

          40

          Li(Inner circumference)

          A

          13

          8

          40

          Li(Inner circumference)

          B

          17

          11

          40

          Li(Inner circumference)

          C

          22

          14

          40

          Li(Inner circumference)

          D

          32

          20

          40

          Li(Inner circumference)

          Narrow V band

          SPZ

          10

          8

          40

          LD(Pitch line length)

          SPA

          13

          11

          40

          LD(Pitch line length)

          SPB

          17

          14

          40

          LD(Pitch line length)

          SPC

          22

          18

          40

          LD(Pitch line length)

          9N(3V)

          9.7

          8

          40

          La(Circumference)

          15N(5V)

          16

          13.5

          40

          La(Circumference)

          25N(8V)

          25.5

          23

          40

          La(Circumference)

          Selection method of V-belt

             1 The selected model shall be suitable for the selected V-belt, otherwise the V-belt will be abnormal in the pulley groove. When replacing V-belt, bring the old one to the agricultural machinery department for purchase to prevent the wrong model.

             2 Before the correct installation, install the V-belt and a group of V-belts in the same way.

             3 When installing the pulley in series, the centers of the two upper pulleys must be aligned, otherwise, the V-belt will work unilaterally, wear seriously, and reduce the service life of the V-belt.

             4 The proper tightness of V-belt must be checked and adjusted frequently to make it meet the requirements. Too loose V-belt is not only easy to slip, but also increases the wear of V-belt, even unable to transmit power. Too tight V-belt will not only elongate, deform and damage the V-belt, but also cause the main bearing and clutch bearing of the engine to suffer too much force, which will accelerate the wear of V-belt. The correct inspection method is: use your hand in the middle of each tape, apply a vertical pressure of about 2kg, and it is appropriate to sink 20-30mm, and adjust it in time if it is not suitable.

             5 When there are two or more V-belts to be replaced, the V-belts of the specified model shall be selected, and the tightness of each group of V-belts shall be the same.

             6 To prevent contamination, oil and muddy water in V-belt shall be strictly prevented, and contact with corrosive substances such as acid and alkali shall be avoided, so as to prevent slipping and early damage caused by corrosion of V-belt.

             7 The operators and users of the daily maintenance machine should master the correct operation essentials in the normal driving, and try to avoid sudden starting and sudden braking according to the technical requirements of the operation manual; also, it should prevent frequent overload operation; when the machine is out of service for a long time, the V-belt should be removed and stored separately.


          Previous: Joint band
          主站蜘蛛池模板: 免费欧洲美女牲交视频| a级无遮挡超级高清-在线观看| 久久久婷婷成人综合激情| 久久国产成人免费网站777| 成人做爰高潮尖叫声免费观看| a亚洲va欧美va国产综合| 欧美日韩亚洲国产精品 | 澎湖县| 余庆县| 国产精品亚洲色婷婷99久久精品 | 国产精品久久久久久52avav| 18分钟处破好疼哭视频在线观看| 丘北县| 中国亚州女人69内射少妇| 亚洲+综合+国产| 精品人妻1区2区3区| 欧美熟妇喷潮xxxx| 登封市| 51视频国产精品一区二区| 黄梅县| 日韩av无码久久精品免费| 宣汉县| 精品国模一区二区三区| 动漫黄在线观看免费| 黄石市| 国产成人av在线影院| 国产自偷自偷免费一区| 好男人在线视频免费观看| 亚洲天堂av 在线| 欧美性xxxxx极品| 激情内射亚洲一区二区三区| 成全在线观看高清资源| 精精国产xxx在线观看| 竹北市| 人c交zo○zooxx全过程| 久久亚洲精品无码| 国产三级在线观看完整版| 新婚人妻ntr中文字幕| 牛鞭伸入女人下身的真视频| 黄色网站免费在线观看| 熟女人妻水多爽中文字幕|